課件dm-md64x64測試報告v1.2

1、快思聰技術部DM-MD6464測試報告n 文檔版本：V 1.2n 編輯日期：2013-09-12歷史日期版本內容2013.4.26V 1.0Michael第一版2013.5.5V 1.1Michael更正 5.2.1 內容：不能通過 Toolbox SYSTEM INFO 升級設備 Firmware。增加 5.3.通過 Web 方式查看、配置設備。增加 5.4. Firmware 升級。增加 Firmware 升級后界面的變化對比。2013.9.12V 1.2Michael刪除 Firmware 升級前后界面變化對比。更新 Firmware 升級到 1.008.0003 后的界面。目錄一、二、

2、三、四、五、測試目的4測試硬件環境4測試軟件環境5系統硬件連接示意圖：5測試內容65.1. 通過 DM-MD6464 上集成的觸摸屏查看、配置設備....1.6.設備外觀6設備啟動完畢后界面8區域 18區域 29區域 320區域 4215.2. 通過 Toolbox 查看、配置設備...5.2.5.使用 SYSTEM INFO（LAN 口）23使用 DMTool（LAN 口）23使用 Device Discovery Tool（LAN 口）24使用 Text Console（LAN 口）27

3、對輸入、輸出端設備進行設置（SERVICE 口）325.3. 通過 Web 方式查看、配置設備5...5.3.5.通過 WEB 方式登陸設備59區域 159區域 260區域 368區域 4695.4. Firmware 升級715.4.1. 使用 Toolbox SYSTEM INFO 升級715.4.2. 使用 FTP 方式升級715.4.3. 使用 SD 卡方式升級74六、 測試中遇到的問題75一、 測試目的測試 DM-MD6464 性能以及與 DM-MD-88/1616/3232 在使用中的區別及性能。二、 測試硬件環境型號數量Firmware

4、 版本備注DM-MD64641臺1.008.0003(dm-md64x64_ 1.001.0056.zip)DMB-I-S1片-DMB-O-S1片-DM-TX-201-S1臺-DM-RMC-100-S1臺-多模光纖2條-顯示器1臺-帶輸入。筆記本電腦1臺-VGA 輸出。三、 測試軟件環境四、 系統硬件連接示意圖：VGAFiberFiberLAN序號名稱版本號1Crestron Datebase41.00.002.002Device Database51.05.005.003SIMPL Windows4.02.20.004SIMPL PLUS CROSS COMPILER1.35VisionTo

5、ols Pro-e76Crestron Toolbox4五、 測試內容5.1.通過 DM-MD6464 上集成的觸摸屏查看、配置設備5.1.1. 設備外觀正面：區域 1：15”觸摸屏。用于信號切換、設備參數設置等。區域 2：Computer USB 接口、電源指示燈、電源燈、HW-R。背面：區域 1：8 個輸入板卡插槽。區域 2：8 個輸出板卡插槽。區域 3：1 個 CPU 板卡插槽（DMB-CPU-64）。區域 4：1 個風扇模塊安裝位置（DM-MDA-64-FANTRAY）。區域 5：2 個電源模塊安裝位置（DM-MDA-64-PWS）。DM-MD646

6、4 默認包含模塊：DMB-CPU-64 *1DM-MDA-64-FANTRAY *1 DM-MDA-64-PWS *25.1.2. 設備啟動完畢后界面設備起動完畢后顯示如下圖所示：區域 1：當前所選擇信號源預覽和信息。區域 2：設備參數設置、切換命令執行。區域 3：信號源選擇區。區域 4：輸出選擇區。5.1.3. 區域 1顯示當前所選擇信號源的預覽和信息，如下圖所示：1342如果點擊預覽畫面右下角的，會全屏預覽信號源，如下圖所示：在全屏預覽下，點擊觸摸屏任意位置返回。5.1.4. 區域 2設備參數設置、切換命令執行，如下圖所示：此區域有 6 個按鈕：view、Select All、ClearA

7、ll、Instant Take 和 Take。View：切換輸入、輸出按鈕顯示樣式，如下圖所示：點擊后彈出 Selection框，如下圖所示：在這個界面有 12 個子選項：Main、Inputs、Outputs、Ethernet、System Overview、Password、Audio、Naming、Display Setup、Firmware、System 和 Error Log。Main：返回主界面，如下圖所示：Inputs：進入輸入板卡信息查看界面，如下圖所示：插槽中插有輸入板卡插槽中沒有輸入板卡點擊某路輸入通道中的“Configure EDID”會彈出“EDIT Setup”框，如

8、下圖所示：Outputs：進入輸出板卡信息查看界面，如下圖所示：插槽中插有輸出板卡插槽中沒有輸出板卡Ethernet：設置設備的 IP 地址信息等，如下圖所示：System Overview：整個系統的信息預覽，如下圖所示：Password：設置，如下圖所示：Audio：設置音量，如下圖所示：（喇叭在哪里？）Naming：按鈕灰色，不可用。DisplaySetup：設置觸摸屏亮度、待機時間和位置校驗，如下圖所示：Firmware：對設備 Firmware 進行升級，如下圖所示：點擊“Check Versions”后生成報告，顯示當前設備的 Firmware 版本、升級包中 Firmware的版

9、本和那些設備需要升級 Firmware，如下圖所示：點擊“Update”后開始漫長的升級，期間設備會重啟，請保證設備不要斷電。點擊“ViewLastUpdate”顯示設備 Firmware 更新歷史，如下圖所示：“Cancel Update”取消當前正在進行的升級操作。System：重啟系統，如下圖所示：點擊“Reboot”后會彈出確認框，如下圖所示：Error Log：顯示錯誤日志，如下圖所示：Select All、Clear All、Instant Take 和 Take:Select All：當選擇個某路輸入通道時，點擊“Select All”按鈕會選擇所有輸出通道（僅安裝了輸出板卡的通

10、道按鈕）。Clear All：當選擇個某路輸入通道時，點擊“Clear All”按鈕取消選擇所有輸出通道（僅安裝了輸出板卡的通道按鈕）。Instant Take:立即切換模式，啟動后選擇輸入后，單擊輸出立即切換，不用在安 Take 鍵， 同時 Take 鍵失效。Take：當選擇完輸入、輸出通道后，點擊 Take 鍵執行當前選擇的路由操作。5.1.5. 區域 3顯示輸入通道選擇按鈕，如下圖所示：如果插槽上沒有板卡，相對應的按鈕會顯示為下圖所示：按鈕可見，但不可選擇。當插槽上有板卡，相對應的按鈕會顯示為下圖所示：按鈕可見，也可選擇。如果某路輸入通道上連接了器，相對應按鈕顏色會變?yōu)榫G色，如下圖所示：

11、當選擇某路輸入通道后，按鈕邊框顏色會變?yōu)?，如下圖所示：5.1.6. 區域 4顯示輸出通道選擇按鈕，如下圖所示：如果插槽上沒有板卡，相對應的按鈕會顯示為右圖所示：按鈕可見，但不可選擇。當插槽上有板卡，相對應的按鈕會顯示為右圖所示：按鈕可見，也可選擇。當選擇了某路輸入信號后：1、選擇某路輸出按鈕后，按鈕邊框會閃爍，如下圖所示：此時點擊區域 2 中的 Take 按鈕后，相應的路由會被打通，并且輸出通道按鈕右下角會顯示輸入通道號，如下圖所示：2、如果當前選擇輸入信號已經給了某路輸出時，再點擊這路輸出，輸出按鈕的邊框顏色會在和紅色間閃爍，如下圖所示：此時點擊區域 2 中的 Take 按鈕后，相應路由會被

12、打斷，輸出按鈕右下角如下圖所示：顯示任何信息，路由打通和打斷操作可同時進行（同一路輸入通道時）。5.2.通過 Toolbox 查看、配置設備5.2.1. 使用 SYSTEM INFO（LAN 口）使用 SYSTEM INFO 時，目前只能查看設備 Firmware 版本，不支持其它功能，例如設置設備IP 地址等，如下圖所示：5.2.2. 使用 DMTool（LAN 口）已經無法使用 DMTool 對設備進行切換控制，如下圖所示：5.2.3. 使用 Device Discovery Tool（LAN 口）可以找到設備，但目前只有“Firmware”功能可以使用，“Ethernet Setting

13、s”、“Modify IPTable”無法使用，如下圖所示：點擊“Firmware”后彈出 Firmware 窗口，但無法對設備進行升級操作，如下圖所示：點擊“Etnernet Settings”后彈出 Etnernet Settings 窗口，但無法對設備進行設置操作，如下圖所示：點擊“Modify IP Table”后彈出 IP Talbe Setup 窗口，但無法對設備進行設置操作，如下圖所示：點擊“Advancad”后彈出 SystemInfo 窗口，如下圖所示：5.2.4. 使用 Text Console（LAN 口）可以使用，如下圖所示：命令列表：8021XAUthenticate

14、AdministratorEnable/Disable 802.1x Authentication.8021XDOMainAdministratorConfigure/View 802.1x Domain Name.8021XMEThodAdministratorConfigure/View EAP Method.8021XPASswordAdministratorConfigure 802.1x Password.8021XTRUStedcasAdministratorSelect/List802.1xTrustedCA s.8021XUSERnameAdministratorConfigu

15、re/View 802.1x User Name.8021XVALidateserverAdministratorRequireValidationOf802.1x Authentication Servers.ADDBLOCKEDipAdministratorAdd an IP Address to the blocked listADDDnsAdministratorAdd an entry to DNS server ListADDDOMAINGroupAdministratorAdd a domain group to this control systemADDGroupAdmini

16、stratorCreate a new local groupADDPeerProgrammerAdd a peer(slave) entry to IP tableADDPORTMAPAdministratorAdd a port map to the NAT tableADDSLAVEOperatorConsole command to enter the Peer System IP Address and IPIDADDUSERAdministratorCreate a new local userADDUSERTogroupAdministratorAdd an existing l

17、ocal or domain user to an existing local groupADLOGInAdministratorLogin to Active Directory serverADLOGOutAdministratorLogout from Active Directory serverAUDITLoggingAdministratorDisplay or Change the current audit logging operation.AUTHenticationAdministratorAuthentication on/offBRIGHTNESSProgramme

18、rSet LCD brightness level.BROADcastOperatorEnable/disable broadcasting of errors.BYEOperatorClose user session for this connectionCARDSOperatorDisplay Cards Detected in SystemCDOperatorChange DirectoryAdministratorAdd, Remove, List or ViewsCLEARerrOperatorClears the current error log.CLEARAUDITLOGAd

19、ministratorClear the audit log.COPYfileProgrammerCopy a file to a different directoryCORE3UilevelOperatorView core3 UI Level.CORE3VersionOperatorView core3 Version.CORE3XPANELWEBProgrammerConfigure the core3 XPanel Flash policy serverCTPPORTAdministratorSet/Get the CTP PortCURSORProgrammerShow or Hi

20、de Cursor.DATASTOREDELeteProgrammerClear the Logs for the Specified ProgramDATASTOREEXPORTOperatorExport to XML fileDATASTOREIMPORtOperatorImport from XML fileDATASTORESTATusOperatorThe Data Store StatusDEFAULTPORTMAPAdministratorSetup default port mappingsDEFRouterAdministratorSet default router.DE

21、LeteProgrammerRemove file(s)DELETEDOMAINGroupAdministratorDeleteadomaingroupthatwas previously added to this control systemDELETEGroupAdministratorDelete an existing local groupDELETEUserAdministratorDelete an existing local userDHCPAdministratorEnable/disable dynamic IP addressing.DHCPOPTAdministra

22、torSets DHCP Server OptionsDIROperatorList files and directories in current directoryDOMAinnameAdministratorSet the domain name for DNS environmentECHOOperatorEnable/disable character echoingENABLEFEatureAdministratorEnable/disable optional featuresENTERSETUPSEQAdministratorEnable/disable hard key s

23、etup launch sequenceERASEProgrammerRemove file(s)ERRlogOperatorPrints the current error log.ETHERNETAdministratorEnable/disable EthernetETHERNETADAPTERAdministratorEnable/Disable Ethernet AdaptersETHWdogAdministratorEnable/disable Ethernet Watchdog.FLASHVersionOperatorView Flash Version and Vendor.F

24、ORCEDREBOOTOperatorForces system rebootFORMATProgrammerFormat external memory cardFREEOperatorShow available file spaceGETAUDITLOGAdministratorRetrieve the audit log.GETCODEOperatorRetrieve code needed for eControl2 activationGETPAsswordruleAdministratorGet password rules for local usersHELPOperator

25、Display help screensHOSTnameAdministratorSet the host name for DNS environmentICMPAdministratorEnable/disable ICMP pingINFOOperatorPrint Software CapabilitiesIPAddressAdministratorSet IP address.IPCONFIGOperatorDisplay/Configure IP SettingsIPMaskAdministratorSet IP Subnet Mask.IPTableOperatorDisplay

26、 IP TableISDIROperatorIs the parameter a directoryKILLSOCKETAdministratorClose an active TCP console socketLISTBLOCKEDipAdministratorList the blocked IP addressesLISTDNSOperatorDisplay the list of DNS serversLISTDOMAINGroupsAdministratorList domain groups that were added to this control systemLISTGR

27、OUPSAdministratorList existing local groupsLISTGROUPUsersAdministratorList all existing (local and domain) users in an existing local groupLISTUSERSAdministratorList of users authenticated on this systemLOADIPTABleProgrammerLoad New IPTableLOGOFFUserorConnectLogoff current userMAKEDIRProgrammerCreat

28、e a DirectoryMESSageOperatorDisplay a message on the screen.MIPTableProgrammerDisplay Master IP TableMOVEfileProgrammerMove a file to a different directoryNATENABLEAdministratorEnable/disableNetworkAddress Translator (NAT)NVRAMREBOOTOperatorPrint reboot informationOOTBFOperatorConsole command to ena

29、ble OOTBF debug dataOSDProgrammerstart On Screen Display when bootPERSISTENTLOGAdministratorStart PersistentLog on system bootPINGOperatorPing Remote NodePRINTAUDITLOGAdministratorPrint the audit log.PROGREGisterProgrammerRegisters/Unregistersthespecified programPROGRESetOperatorRestarts the specifi

30、ed programPROGUPTIMEOperator(*) Display the time the program is runningPUSHUPDATEOperatorUpdate Main, Blades, and attached EndpointsRAMFreeOperatorShow available RAM file spaceREBOOTOperatorPerform system rebootREMBLOCKEDipAdministratorRemove an IP Address from the blocked listREMDnsAdministratorRem

31、ove an entry to DNS server ListREMOVEDIRProgrammerRemove a DirectoryREMOVETBCLIENTProgrammerRemoves Console Client ConfigurationREMOVEUserfromgroupAdministratorRemove an existing local or domain user from an existing local groupREMPeerProgrammerRemove a peer(slave) entry to IP tableREMPORTMAPAdminis

32、tratorRemove a port map from the NAT tableRESETPasswordAdministratorReset an existing local users passwordRESTOReAdministratorRestore factory defaultsRMLOGerrOperatorEnable logging errors to the file.RMTRANSferProgrammerTransfer a project to/from removable mediaSCREENSHOTOperatorTake a screen shot.S

33、ECURECIPportProgrammerSet Secure(SSL) port number for CIPSECURECTPportAdministratorSet/Get Secure CTPPortSECUREWebportAdministratorSet Secure(SSL) port number for Web.SETLogoffidletimeAdministratorSet idle time allowed before current user is automatically logged offSETLOCKOUTTIMEAdministratorSet tim

34、e that an IP is blocked from loginSETLOGINAttemptsAdministratorSet theum number of login attempts before a user is blockedSETPAsswordruleAdministratorSet password rules for local usersSETSYSTEMIDOperatorSet DM System IdSETTBCLIENTCONNFRVRProgrammerSet Console Client to try and reconnect after a disc

35、onnectSETTBCLIENTIPAProgrammerSet Console Client Server IP AddressSETTBCLIENTNUMRETRYProgrammerSet Console Client number of retriesSETTBCLIENTPORTNUMProgrammerSet Console Client Server Port NumberSHOWEXTRAerrorsOperatorEnables extended errorsSHOWHWOperatorDisplay hardware configurationSHOWPORTMAPAdm

36、inistratorDisplay the current portmaps for the NATSMARTUPDATEOperatorControl System-Wide UpdatesSNTPAdministratorConfigure network time synchronizationSOCKETSendtimeoutAdministratorSet TCP Socket Send Timeout value in MillisecondsSSHPORTAdministratorSet/Get the SSH PortSSLAdministratorDisplay/Set SS

37、L type.SSPTASKsOperator(*) Show currently executing user threads in SIMPL# Pro.STANDBYOperatorPuts the panel into standby.STARTTBCLIENTProgrammerEnables Console Client ConnectionSTBYTOProgrammerSet the standby timeout.STOPPROGramOperatorStops the specified programSTOPTBCLIENTProgrammerDisable Consol

38、e Client ConnectionSUDOOperatorSudo CommandSYSLOGOperatorEnable/disable system UI log.SYSMSGProgrammerEnable/disable system message display.TCPKEEPALIVEProgrammerEnable/disable TCP Keep AliveTELNETportAdministratorEnable/disable the Telnet portTESTDNSOperatorTest DNS ServerTIMEdateProgrammerSet the

39、time and dateTIMEZoneProgrammerSet the timezoneTYPEOperatorDisplay file contentsUCMDOperator(*) Send a command from the console to the user programUPDATEPasswordOperatorUpdate current local users passwordUPTIMEOperatorDisplay the time the system is runningUSERINFOrmationAdministratorShow access info

40、rmation for a specific user.USERPROGCMDOperator(*) Send a command from the console to the user programVERsionOperatorVersion CommandWEBINITProgrammerInitialize Webserver default file.WEBPORTAdministratorSet port number for Webserver.WEBSERVerAdministratorEnable/disable Webserver.WHOAdministratorGene

41、rate a report of the Ethernet consolesWHOAmiOperatorDisplay current users identityXGETfileOperatorUse XMODEM to transfer file from ROMXPUTfileProgrammerUse XMODEM to transfer file to ROM5.2.5. 對輸入、輸出端設備進行設置（SERVICE 口）根據文檔“qs_dm-md64X64_endpoint_configuration.pdf”的描述，使用 DM-MD6464 自帶的 USB-LAN 網卡連接，與使用

42、筆記本自帶的網卡連接，結果相同。1、將連接到DM-MD6464 SERVICE 口筆記本電腦上的網卡IP 地址設置為：54，子網掩碼設置為：。2、使用 Toolbox 中的 DeviceDiscoveryTool 搜索設備，結果如下圖所示：可以搜索到輸入板卡（DMB-I-S）、輸出板卡（DMB-O-S）、主機箱（DM-MD6464）、TX-201-S）、接收端（DM-RMC-SCALER-S ）。端（DM-3、分別雙擊選擇搜索到的設備：輸入板卡（DMB-I-S），如下圖所示：點擊“Advancad”后彈出 System Info 窗口，如下圖所示

43、：輸出板卡（DMB-O-S），如下圖所示：點擊“Advancad”后彈出 System Info 窗口，如下圖所示：主機箱（DM-MD6464），如下圖所示：點擊“Firmware”后彈出 Firmware 窗口，但無法對設備進行升級操作，如下圖所示：點擊“Etnernet Settings”后彈出 Etnernet Settings 窗口，但無法對設備進行設置操作，如下圖所示：點擊“Modify IP Table”后彈出 IP Talbe Setup 窗口，但無法對設備進行設置操作，如下圖所示：點擊“Advancad”后彈出 SystemInfo 窗口，如下圖所示：端（DM-TX-201-S

44、），如下圖所示：點擊“DM Tool”后彈出 DM Tool 設置窗口，如下圖所示：點擊“Firmware”后彈出 Firmware 窗口，可對單獨設備進行升級，如下圖所示：點擊“Modify IP Table”后彈出 IP Talbe Setup 窗口，可對設備的 IP 地址進行設置（接在矩陣上，IP 地址就固定了，請不要修改），如下圖所示：點擊“Modify IP Table”后彈出 IP Talbe Setup 窗口（接在矩陣上時，請不要修改），如下圖所示：點擊“Advancad”后彈出 System Info 窗口，如下圖所示：接收端（DM-RMC-SCALER-S），如下圖所示：點擊

45、“DM Tool”后彈出 DMTool 設置窗口，如下圖所示：點擊“Firmware”后彈出 Firmware 窗口，可對單獨設備進行升級，如下圖所示：點擊“Modify IP Table”后彈出 IP Talbe Setup 窗口，可對設備的 IP 地址進行設置（接在矩陣上，IP 地址就固定了，請不要修改），如下圖所示：點擊“Modify IP Table”后彈出 IP Talbe Setup 窗口（接在矩陣上時，請不要修改），如下圖所示：點擊“Advancad”后彈出 SystemInfo 窗口，如下圖所示：4、通過 Text Console 連接輸入板卡（DMB-I-S）、輸出板卡（DM

46、B-O-S）、主機箱（DM-MD6464）、端（DM-TX-201-S）、接收端（DM-RMC-100-S ）都有相應令可以使用。輸入板卡（DMB-I-S）8021XAUthenticateAdministratorEnable/Disable 802.1x Authentication.8021XDOMainAdministratorConfigure/View 802.1x Domain Name.8021XMEThodAdministratorConfigure/View EAP Method.8021XPASswordAdministratorConfigure 802.1x Pass

47、word.8021XTRUStedcasAdministratorSelect/List802.1xTrustedCA s.8021XUSERnameAdministratorConfigure/View 802.1x User Name.8021XVALidateserverAdministratorRequireValidationOf802.1x Authentication Servers.ADDBLOCKEDipAdministratorAdd an IP Address to the blocked listADDDnsAdministratorAdd an entry to DN

48、S server ListADDDOMAINGroupAdministratorAdd a domain group to this control systemADDGroupAdministratorCreate a new local groupADDPeerProgrammerAdd a peer(slave) entry to IP tableADDUSERAdministratorCreate a new local userADDUSERTogroupAdministratorAdd an existing local or domain user to an existing

49、local groupADLOGInAdministratorLogin to Active Directory serverADLOGOutAdministratorLogout from Active Directory serverAUDITLoggingAdministratorDisplay or Change the current audit logging operation.AUTHenticationAdministratorAuthentication on/offBROADcastOperatorEnable/disable broadcasting of errors

50、.BYEOperatorClose user session for this connectionCARDSOperatorDisplay Cards Detected in SystemCDOperatorChange DirectoryAdministratorAdd, Remove, List or ViewsCLEARerrOperatorClears the current error log.CLEARAUDITLOGAdministratorClear the audit log.COPYfileProgrammerCopy a file to a different dire

51、ctoryCTPPORTAdministratorSet/Get the CTP PortDALGIOROperatorRead from GIODALGIOWOperatorWrite to GIODALIROperatorRead from I2C devicesDALIWOperatorWrite to I2C devicesDALSTOperatorSPI transfer to devicesDATASTOREDELeteProgrammerClear the Logs for the Specified ProgramDATASTOREEXPORTOperatorExport to XML fileDATASTOREIMPORtOperatorImport from XML fileDATASTORESTATusOperatorThe Data Store StatusDEFRouterAdministratorSet defa