獨立鍵盤和矩陣鍵盤中斷和查詢_第1頁
獨立鍵盤和矩陣鍵盤中斷和查詢_第2頁
獨立鍵盤和矩陣鍵盤中斷和查詢_第3頁
獨立鍵盤和矩陣鍵盤中斷和查詢_第4頁
獨立鍵盤和矩陣鍵盤中斷和查詢_第5頁
已閱讀5頁，還剩13頁未讀， 繼續免費閱讀

下載本文檔

版權說明：本文檔由用戶提供并上傳，收益歸屬內容提供方，若內容存在侵權，請進行舉報或認領

文檔簡介

1、獨立鍵盤中斷：#include<reg52.h>#define uchar unsigned char#define uint unsigned intsbit we = P27;sbit du = P26;sbit S2 = P30;sbit S3 = P31;sbit S4 = P32;sbit S5 = P33; uchar code leddata= 0x3F, /"0" 0x06, /"1" 0x5B, /"2" 0x4F, /"3" 0x66, /"4" 0x6D, /&

2、quot;5" 0x7D, /"6" 0x07, /"7" 0x7F, /"8" 0x6F, /"9" 0x77, /"A" 0x7C, /"B" 0x39, /"C" 0x5E, /"D" 0x79, /"E" 0x71, /"F" ;void delay(uint z)uint x,y;for(x = z; x > 0; x-)for(y = 114; y > 0 ; y

3、-);void delay1s(void)unsigned char a,b,c,d;for(a = 5; a > 0; a-)for(b = 4; b > 0; b-)for(c = 116; c > 0; c-)for(d = 214; d > 0; d-);void main ()TMOD = 0x01; /配置定時器0工作于方式一TH1 =(65536-50000)/256; /高八位裝入初值TL1 = (65536-50000)%256; /低八位裝入初值ET0 = 1; /開定時器0中斷EA = 1; /開總中斷TR0 = 1; /啟動定時器0delay1s

4、();while(1)we = 1;/打開位選P0 = 0xfc;/八位數碼管低兩位we = 0;/鎖存位選du = 1;/打開段選端P0 = leddata15;while(1)if(S2 = 0)delay(5);/軟件消抖if(S2 = 0)P0 = leddata0;while( !S2 );/松手檢測if(S3 = 0)delay(5);/軟件消抖if(S3 = 0)P0 = leddata1;while( !S3 );/松手檢測if(S4 = 0)delay(5);/軟件消抖if(S4 = 0)P0 = leddata2;while( !S4 );/松手檢測if(S5 = 0)de

5、lay(5);/軟件消抖 if(S5 = 0)P0 = leddata3;while( !S5 );/松手檢測void Timer0_int() interrupt 1 /重新裝初值TH1 = (65536-50000)/256; /高八位裝入初值TL1 = (65536-50000)%256; /低八位裝入初值 矩陣鍵盤中斷：#include<reg52.h>#define uchar unsigned char#define uint unsigned intsbit we = P27;sbit du = P26;uchar code leddata= 0x3F, /"

6、;0" 0x06, /"1" 0x5B, /"2" 0x4F, /"3" 0x66, /"4" 0x6D, /"5" 0x7D, /"6" 0x07, /"7" 0x7F, /"8" 0x6F, /"9" 0x77, /"A" 0x7C, /"B" 0x39, /"C" 0x5E, /"D" 0x79, /"E&quo

7、t; 0x71, /"F" ;void delay(uint z)uint x,y;for(x = z; x > 0; x-)for(y = 114; y > 0 ; y-);void delay1s(void)unsigned char a,b,c,d;for(a = 5; a > 0; a-)for(b = 4; b > 0; b-)for(c = 116; c > 0; c-)for(d = 214; d > 0; d-);uchar KeyScan()/帶返回值的子函數uchar cord_l,cord_h;/聲明列線和行線的值的

8、儲存變量P3 = 0xf0;/1111 0000delay1s();if( (P3 & 0xf0) != 0xf0)/判斷是否有按鍵按下delay(5);/軟件消抖if( (P3 & 0xf0) != 0xf0)/判斷是否有按鍵按下 cord_l = P3 & 0xf0;/ 儲存列線值 P3 = cord_l | 0x0f; cord_h = P3 & 0x0f;/ 儲存行線值 while( (P3 & 0x0f) != 0x0f );/松手檢測 return (cord_l + cord_h);/返回鍵值碼void KeyPro()switch( Ke

9、yScan() ) /第一行鍵值碼case 0xee: P0 = leddata0;break;case 0xde: P0 = leddata1;break;case 0xbe: P0 = leddata2;break;case 0x7e: P0 = leddata3;break;/第二行鍵值碼case 0xed: P0 = leddata4;break;case 0xdd: P0 = leddata5;break;case 0xbd: P0 = leddata6;break;case 0x7d: P0 = leddata7;break;/第三行鍵值碼case 0xeb: P0 = ledda

10、ta8;break;case 0xdb: P0 = leddata9;break;case 0xbb: P0 = leddata10;break;case 0x7b: P0 = leddata11;break;/第四行鍵值碼case 0xe7: P0 = leddata12;break;case 0xd7: P0 = leddata13;break;case 0xb7: P0 = leddata14;break;case 0x77: P0 = leddata15;break;void main ()TMOD = 0x01; /配置定時器0工作于方式一TH1 =(65536-50000)/256

11、; /高八位裝入初值TL1 = (65536-50000)%256; /低八位裝入初值ET0 = 1; /開定時器0中斷EA = 1; /開總中斷TR0 = 1; /啟動定時器0while(1)we = 1;/打開位選P0 = 0xfc;/八位數碼管低兩位we = 0;/鎖存位選du = 1;/打開段選端P0 = leddata0;while(1)KeyPro();/提取鍵值碼并且送不同數值給數碼管顯示void Timer0_int() interrupt 1 /重新裝初值TH1 = (65536-50000)/256; /高八位裝入初值TL1 = (65536-50000)%256; /低八

12、位裝入初值 矩陣查詢#include <reg52.h>#define uchar unsigned char#define uint unsigned intsbit we = P27;sbit du = P26;uchar code leddata= 0x3F, /"0" 0x06, /"1" 0x5B, /"2" 0x4F, /"3" 0x66, /"4" 0x6D, /"5" 0x7D, /"6" 0x07, /"7"

13、; 0x7F, /"8" 0x6F, /"9" 0x77, /"A" 0x7C, /"B" 0x39, /"C" 0x5E, /"D" 0x79, /"E" 0x71, /"F" 0x76, /"H" 0x38, /"L" 0x37, /"n" 0x3E, /"u" 0x73, /"P" 0x5C, /"o" 0x40

14、, /"-" 0x00, /熄滅 0x00 /自定義 ;void delay10ms(void)unsigned char i,j,k;for(i = 5; j > 0; i-)for(j = 4; j > 0; j-)for(k = 248; k > 0; k-);void delay1s(void)unsigned char a,b,c,d;for(a = 5; a > 0; a-)for(b = 4; b > 0; b-)for(c = 116; c > 0; c-)for(d = 214; d > 0; d-);uchar

15、KeyScan()/帶返回值的子函數unsigned char p;uchar cord_l,cord_h;/聲明列線和行線的值的儲存變量P3 = 0xf0;/1111 0000delay1s();if( (P3 & 0xf0) != 0xf0)/判斷是否有按鍵按下delay10ms();/軟件消抖if( (P3 & 0xf0) != 0xf0)/判斷是否有按鍵按下 cord_l = P3 & 0xf0;/ 儲存列線值 P3 = cord_l | 0x0f; cord_h = P3 & 0x0f;/ 儲存行線值 while( (P3 & 0x0f) !=

16、 0x0f );/松手檢測 return (cord_l + cord_h);/返回鍵值碼void KeyPro()switch( KeyScan() ) /第一行鍵值碼case 0xee: P0 = leddata0;break;case 0xde: P0 = leddata1;break;case 0xbe: P0 = leddata2;break;case 0x7e: P0 = leddata3;break;/第二行鍵值碼case 0xed: P0 = leddata4;break;case 0xdd: P0 = leddata5;break;case 0xbd: P0 = leddat

17、a6;break;case 0x7d: P0 = leddata7;break;/第三行鍵值碼case 0xeb: P0 = leddata8;break;case 0xdb: P0 = leddata9;break;case 0xbb: P0 = leddata10;break;case 0x7b: P0 = leddata11;break;/第四行鍵值碼case 0xe7: P0 = leddata12;break;case 0xd7: P0 = leddata13;break;case 0xb7: P0 = leddata14;break;case 0x77: P0 = leddata1

18、5;break;void main()we = 1;/打開位選P0 = 0;/八位數碼管全顯示we = 0;/鎖存位選du = 1;/打開段選端P0 = leddata22;while(1) KeyPro();/提取鍵值碼并且送不同數值給數碼管顯示獨立查詢#include<reg52.h>#define uchar unsigned char#define uint unsigned intsbit we = P27;sbit du = P26;sbit S2 = P30;sbit S3 = P31;sbit S4 = P32;sbit S5 = P33; uchar code l

19、eddata= 0x3F, /"0" 0x06, /"1" 0x5B, /"2" 0x4F, /"3" 0x66, /"4" 0x6D, /"5" 0x7D, /"6" 0x07, /"7" 0x7F, /"8" 0x6F, /"9" 0x77, /"A" 0x7C, /"B" 0x39, /"C" 0x5E, /"D" 0x79, /"E" 0x71, /&qu

溫馨提示

  • 1. 本站所有資源如無特殊說明，都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
  • 2. 本站的文檔不包含任何第三方提供的附件圖紙等，如果需要附件，請聯系上傳者。文件的所有權益歸上傳用戶所有。
  • 3. 本站RAR壓縮包中若帶圖紙，網頁內容里面會有圖紙預覽，若沒有圖紙預覽就沒有圖紙。
  • 4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
  • 5. 人人文庫網僅提供信息存儲空間，僅對用戶上傳內容的表現方式做保護處理，對用戶上傳分享的文檔內容本身不做任何修改或編輯，并不能對任何下載內容負責。
  • 6. 下載文件中如有侵權或不適當內容，請與我們聯系，我們立即糾正。
  • 7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。

評論

0/150

提交評論