聚氨酯工程機械面漆的組成和使用.doc

聚氨酯工程機械面漆的組成和使用Intended Uses用途聚氨酯工程機械面漆適用于各種工程機械的的涂裝用面漆，如建筑機械，農用機械、礦山機械、橋梁機械、交通設施等，也適用各種氣候條件下戶外鋼結構的長效防腐面漆。As finish, suitable to paint all kinds of engineering machinery, such as architectural machine, agricultural machine, mining machine, bridge machine and means of transportation etc. Also may provide long-term anticorrosive protection for outdoor steel structure in all kinds of climate.ProductDescription產品簡介高性能丙烯酸聚氨酯面漆，雙灌裝，以羥基丙烯酸樹脂，耐候顏料及脂肪族異氰酸酯二聚體等制成，漆面美觀，具有優良的抗磨損性能，優異的耐紫外線性能，優異的保色保光性能，不易粉化，不易泛黃，高硬度和附著力強，抗輕度化學物質，低溫下亦能快速固化，高光、半光或啞光。Two-pack paint, based on Hydroxy acrylic resin, weathering pigment and aliphatic Isocyanate dimmer, etc. Excellent performance, Good appearance. The paint film possesses excellent wearability, resistance to ultraviolet, color and gloss retention(no chalking or yellowing), and strong adhesion, In addition, it is hard and resistant to weak chemicals, Fast dry even at low temperature, High gloss, half gloss or matt.ProductInformation產品數據Volume Solids 固體份About 55% 約55% Dry Film Thickness 干膜厚度30-50microns 30-50微米Theoretical Coverage 理論涂布率11.5m2 /Kg based on iron red polyurethane intermediate paint film thick 50um 11.5平方米/公斤(以深色漆和50微米干膜厚計)Practical Coverage 實際涂布率Allow appropriate loss 允許適量損耗Application Details施工詳述Mix Radio 混合比A：B=6 : 1 (WT) 甲：乙=6：1（WT）Method of Application 施工方法 Airless Spray 無空氣噴涂 Recommended 推薦采用Brush or Roller 涂刷或輥涂 Suitable, but using short fur roller to decrease bubble 適用，但需使用短毛滾筒以減少起泡產生 Conventional Spray 傳統噴涂 Recommended 推薦采用Air assistant Airless Spray Recommended 推薦采用Thinner 稀釋劑 C004Cleaner 油漆設備清洗劑 C004Pot Life 使用期 5 ：6 h 23 ：4 h 35 ：2 hStorage 貯存期 A: One year 甲: 一年 B:6 months 乙：6個月Drying time 干燥時間SubstrateTemperature底材溫度,Touch Dry 表干,hHard Dry硬干,hOver coating Interval覆涂間隔Mix最短Max最長523352 10.548 362416 h8 h4 h5 d3 d1 dStorage andHandling貯存與管理Storage 貯存 dry and cool conditions, far from fire and heat source 貯存于陰涼干燥處,遠離火源、熱源 A:18Kg in 20 liter container 甲：18公斤裝于20公升容器中Pack size 包裝規格 B:3Kg in 4 liter container 乙：3公斤裝于4公升容器中Flash Point 閃點 Above23 (Basic agent, curing agent or mixture) 大于23（主劑固化劑、混合物）Specific Gravity 比重 1.20-1.30Kg/L 1.20-1.30公斤/公升Specification and Surface preparation技術要求及表面處理Used for the surface over primer or intermediate-coating, and the surface must be clean, dry and no oil or dirty. 來自 Preceding cost: Epoxy ester, epoxy and polyurethane primer or intermediate paint.聚氨酯工程機械面漆用于涂裝已涂底漆或中涂漆的表面，需保持表面清潔、干燥、無油污。前道配套涂料：環氧酯類、環氧類、聚氨脂類底漆或中涂漆。Limitations限制Must mix component A and B according to the appropriate necessary quantity. Recommended making this paint just before painting, Should use up in pot life in case it would cure and could not be used.In storage or application, should avoid water vapor.按規定比例現配現用，在使用期內用完儲藏及涂裝時，應避免接觸水氣Safety Precautions 安全措施The product must be used in painting area by professionals. When painting, please be sure to refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying the product.The product is a kind of solvent-based paint. In order to avoid the accident or dangerous occurrence, minimal safety precaution, as follow, should be down.The paint contains volatile solvent and it is flammable, So must keep away from sparks and open flames. No smoking at workplace, Effective precautions (such as using explosion-proof electrical equipments. No static electricity accumulation or metal collision etc) also should be done so as to avoid product sparks. Enough ventilation is necessary at application sites. In order to remove any danger of explosion, must keep the ratio of gas / air is less than 10 %, Usually 200 m3of ventilation quantity per 1 Kg solvent (according to the solvent) is necessary, it canMaintain the minimum explosive limit. Take effective precautions to prevent skin and eye contact with the coating (such as the use of overalls, gloves, goggles, face shields and protective oil coating and so on). If paint gets in touch with skin,If accidental skin contact with the product, please use fresh water and soap or an appropriate industrial cleaning agents thoroughly cleansed. In case of eyes being contaminated, rinse with fresh water for 10 min at least and give medical treatment immediately.During painting, it is recommended to wear face shields to prevent inhalation of paint mist and harmful gases.Especially in poorly ventilated environment, it is more necessary.Finally, be handled with care so as not to waste paint barrels of pollution of the environment.NOTICE: If consumers have not taken effective safety precautions (Refer to the specification), our company will NOT be responsible for any accident.聚氨酯工程機械面漆必須由專業人員在工業場所使用。使用時請務必參照本說明書以及相關健康安全手冊。若客戶在使用本產品前,未能詳細了解本產品的相關健康安全知識,請與本公司人員聯系。該涂料為溶劑型涂料，為避免事故或危險發生，應采取最低限度的安全措施如下：此涂料為易燃物,并含有揮發性易燃溶劑，故必須遠離火星和明火。嚴禁在作業場所吸煙，并應該采取有效措施，防止火星產生(如采用防爆電器設備，杜絕靜電積累,避免金屬撞擊等)。施工場所應盡量保持良好通風。為消除使用過程中的爆炸隱患,應保證足夠的通風量以維持氣體/空氣比例不超過最低爆炸極限的10 %,通常每千克溶劑需要200立方米通風量,(與溶劑種類相關)就能維持最低爆炸極限